New Quad 4 Train Air Horn Kit Semi Truck Boat w/ 150 PSI Compressor 12V 3 Liters This compressor comes with built-in 0-150 PSI pressure gauge which is designed for any high-pressure air horns that require on-board air system. Equipped with built-in temperature switch with great performance. Will automatically shut off when air compressor goes over 80°C and restart when it gets back down to 70 °C. This powerful quad trumpet air horn produces a loud roaring sound. Made entirely of metal for maximum protection against all weather conditions.
Note: Keep away from high temperature and moisture. Installation Tips: Face to the mouth of the hose connector and then bind it clockwise with the sealing tape for 3-5 circles.
Then tightly screw up it with the connector of compressor and horn. Remove compressor, receiver drier or accumulator, orifice tube or expansion valve. Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems THE VALVE MUST BE REMOVED before the evaporator can be flushed.FLUSHED CONDENSERS FROM OUTLET TO INLET AND EVAPORATORS FROM INLET TO OUTLET. Warning: Newer Style condenser designs are very hard, and sometime it would be impossible to do flush, In those cases it is suggested that if the compressor has a major failure the condenser should be replaced. Drain all the oil from the new compressor and dispose of according to local, state and federal laws. NOTE: if you compressor has a drain plug you will need to open it up and drain what oil is in there too. Install half oil charge into the compressor and the remainder throughout the system.
Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated. Install new receiver drier or accumulator and new orifice tube or expansion valve. Evacuate the A/C system for a minimum of one hour. After evacuation install half the refrigerant charge and let the system set for 1 minute. Start engine whit A/C controls on MAX AIR with door and windows open.
Add the remaining charge of refrigerant as called for by the manufacture. Pressure Switch Settings : 100 PSI on, 125 PSI off. Compressor Overall size : 385mm (L)137mm (W) 183mm (H)/15" 5" 7. Horn Overall : size 345mm 155mm 165mm/14" 6" 6.
Trumpet length : 165mm, 225mm, 290mm, 345mm/6", 9", 11", 14". 1 x 4-Trumpet air train horn. Fit for cars, trucks, boats and all types of motorcycle.
4-trumpet air train horn with glistening black finishing. Small size but powerful volume and tuned train horn sound. Great sound quality, extremely stable frequency. Long service life, reliable working performance. Unique design and fashion style, Easy to install.
All items are dispatched from our warehouse in Azusa, CA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us.This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description.
We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that's why our customers keep coming back. The item "4 Trumpet Train Air Horn Kit with 12V 150 PSI Air Compressor for Car Truck Train" is in sale since Saturday, July 4, 2020.This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Steering Wheels & Horns". The seller is "homesupplies01" and is located in Westbury, New York. This item can be shipped to United States.