2065-3HP Piston Style Twin Cylinder Air Compressor Pump Motor Head Kit 250L/min

  
Specification Type: Twin-cylinder Color: Silver, Black Material: Steel, Iron, Aluminum Motor Horsepower: 3HP Suitable Power:? Speed: 850r/min Noise Level: 55dB Pressure:? 0.8 Bar Engine Oil: 100# Engine Oil Engine Oil Required: About 1L/0.3gal Pipe Joint Thread: American 3/4 Flow Rate: 7.5CFM Belt Pulley Diameter: 26cm/10.2in Shaft of Pulley Size: 2.2cm/0.9in Mounting Hole Center Distance: 13.614.2cm/5.45.6in Product Size: 30.220.532cm/11.9812.6in Package Size: 37.837.530cm/14.914.811.8in Net Weight: 10.05kg/22.2lbs Gross Weight: 11.95kg/26.4lbs Package Included 1 Air Compressor Pump 1 Air Filter 1 Large Breathing Nozzle 1 Small Breathing Nozzle 2 Screws. 2065-3HP Piston Style Twin Cylinder Air Compressor Pump Motor Head Kit 250L/min.

When the pursuit of ultimate efficiency and durability meets, this high-performance air compressor pump is produced for these. Its high-quality materials feature a long service life, and efficient heat dissipation systems ensure stable performance output. It makes every compression a commitment to quality, and every start a leap in efficiency. With it, you can start a new chapter in efficient power!

Outstanding Performance: The 3HP motor fits with? 2.2kW strong power machine, which can generate a maximum speed of 850r/min. Its elongated cylinder can quickly inflate, meeting the dual needs of speed and efficiency. Low Noise: This pump has a noise level of only 55dB during operation, which is very suitable for places that require minimal interference during work. Stable Operation: The connecting rod has been precisely machined and the high-strength belt pulley strictly. Its balance and support to ensure the balance of the engine during operation.

Cost Effective: Its piston ring adopts a dual scraper ring design, which consumes less engine oil and avoids frequent refueling, saving costs. Twin-cylinder Design: Compared to single-cylinder compressors, the twin-cylinder one can provide greater compression capacity at the same volume, generating high airflow (7.5CFM), achieving up to 0.8 Bar pressure, and providing sufficient and stable air support. Excellent Heat Dissipation: High-quality heat dissipation fins can ensure stable performance of the pump even after long-term operation, effectively reducing mechanical losses and failures caused by overheating. Simple Appearance: The appearance is simple with smooth lines, full of modern and industrial style.

Its classic silver and black combination not only meets your appearance needs, but also highlights your taste. We will reply and solve the problem for you as soon as possible. Air Filter: It is equipped with an air filter, which can effectively prevent impurities from entering the cylinder. Oil Observation Port: The transparent port at the bottom can observe the remaining oil, making it convenient to add oil timely. Breathing Nozzle: It can quickly eliminate exhaust gases in the cylinder and ensure the quality of the output air. It is widely used in various industries such as automotive repair, decoration, construction, scientific research, machinery, and chemical engineering, and provides high-quality compressed air for various applications. Engine Oil: 100# Engine Oil. Engine Oil Required: About 1L/0.3gal.

Pipe Joint Thread: American 3/4. Belt Pulley Diameter: 26cm/10.2in. Shaft of Pulley Size: 2.2cm/0.9in.

Mounting Hole Center Distance: 13.614.2cm/5.45.6in. Product Size: 30.220.532cm/11.9812.6in. Package Size: 37.837.530cm/14.914.811.8in. Net Weight: 10.05kg/22.2lbs. Gross Weight: 11.95kg/26.4lbs.

Please note that the pump must be filled with engine oil (filled to the red point) before use. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. The first consideration is whether the power is matched (applicable to the head with power? Second consideration of installation size (base screw hole center distance).

The third consideration is pipe interface thread. The fourth consideration is the speed of the machine head (the speed of the machine head is best controlled within 1000r/MIN, and the maximum speed is 1300r/MIN). Feedback is very important to us. It is impossible to address issues if we do not know about them!

Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.