4 Trumpet Train Air Horn Kit with 170 PSI Compressor & Air Tank Truck Boat Train

  

Truck Train Quad 4 Trumpet Air Horn Kit Black 170 PSI 12V 3Liters Compressor & House This comes with built-in 0-170 PSI pressure gauge which is designed for any high-pressure air horns that require on-board air system. Equipped with built-in temperature switch with great performance. Will automatically shut off when air compressor goes over 80 °C and restart when it gets back down to 70 °C. Specification: Model number: F22885 Product name: 4-trumpet Air Horn Kit Condition: New Compressor: Overall size: 385mm (L)137mm (W)183mm (H) Max pressure: 170 PSI Operational air pressure100 PSI Power input: DC 12V Max voltage: 18 V Tank capacity: 3 Liters Duty cycle: 15% Hose length: 5.08m Pressure Switch Settings: 100 PSI on, 125 PSI off 4-trumpet air train horn: Color: black Material: zinc Decibel: 150db Voltage: 12V/24V Overall size: 345mm 155mm 165mm Trumpet length: 165mm, 225mm, 290mm, 345mm Trumpet width: 90mm Installation Tips: Face to the mouth of the hose connector and then bind it clockwise with the sealing tape for 3-5 circles.

Then tightly screw up it with the connector of compressor and horn. Remove compressor, receiver drier or accumulator, orifice tube or expansion valve. Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems THE VALVE MUST BE REMOVED before the evaporator can be flushed. FLUSHED CONDENSERS FROM OUTLET TO INLET AND EVAPORATORS FROM INLET TO OUTLET. Warning: Newer Style condenser designs are very hard, and sometime it would be impossible to do flush, In those cases it is suggested that if the compressor has a major failure the condenser should be replaced.

Drain all the oil from the new compressor and dispose of according to local, state and federal laws. NOTE: if you compressor has a drain plug you will need to open it up and drain what oil is in there too.

Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated. Install new receiver drier or accumulator and new orifice tube or expansion valve. Evacuate the A/C system for a minimum of one hour. After evacuation install half the refrigerant charge and let the system set for 1 minute.

Start engine whit A/C controls on MAX AIR with door and windows open. Add the remaining charge of refrigerant as called for by the manufacture.

We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need. Please allow 0.5-1 inch difference due to manual measurement.

There are no instructions included in this kit. We will provide help as much as possible.

Keep away from high temperature and moisture. Package included: 1 X 4-trumpet Air Horn 1 X Air Compressor 1 X Air Tubing. We accept PayoneerPayPalMastercardVISAGoogle Pay American Express etc. The item "4 Trumpet Train Air Horn Kit with 170 PSI Compressor & Air Tank Truck Boat Train" is in sale since Monday, October 25, 2021. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Steering Wheels & Horn Buttons".

The seller is "baseus_official" and is located in Altadena, California. This item can be shipped to United States, Canada, Mexico.

1. Manufacturer Part Number: bLg8941499
2. Brand: MATCC
3. Color: Black
4. Features: High Pressure Air
5. Material: Zinc
6. Horn Type: Truck
7. Type: Train Air Horn Kit
8. Non-Domestic Product: Yes
9. Manufacturer Warranty: 1 Year
10. Placement on Vehicle: Left,Right,Front
11. Contents of the package: 1 X 4-trumpet Air Horn 1 X Air Compressor 1 X Air
12. Voltage: 12V/24V
13. Tank Capacity: 3L
14. Pressure: 170PSI
15. DB output: 150dB+
16. Trumpet length: 165mm,225mm,290mm,345mm
17. Trumpet width: 90mm
18. Duty cycle: 15%
19. Feature: 4 Trumpet W/Air Compressor
20. House length: 5.08m