And copper, which makes it strong and durable. It is an important piece of equipment for vehicle suspension maintenance and upgrading, which improves the suspension performance and safety of the vehicle while reducing suspension damage and repair costs. The copper motor has high conductivity and stable performance, which can bring strong power to meet your daily needs. It only takes few minutes for this product to achieve fast inflation, which can save you a lot of time and electricity.
This product doesn't have an exposed copper core, which can effectively prevent power leakage. The positive and negative terminals of the quick-draw plug never cross and the product is protected against overheating. Which makes it safer to use. It comes with a standard 3/8-inch stainless steel braided hose, a 3/8-inch NPT in-line check valve, fuses, and mounting hardware for your convenience.The noise during the operation of this product does not exceed 72db, which can give you a relatively quiet environment. The filtering device on the product can effectively filter oil, water, and impurities from the. It can also efficiently prevent oil and moisture from corroding this product.
This product can also support 12V car power to achieve convenient and fast inflation at any time and anywhere. The size of this product is. Inch and it only weighs 9.92lbs, so it's lightweight and compact. Meanwhile, the top handle makes it easy for you to carry.
It is equipped with four footpads at the bottom, which are. The integrated fast 12V power input plug on the side of this air compressor makes it convenient to pull and plug, as well as not easy to fall off. It is suitable for car horns, pneumatic suspension systems, pneumatic tools, car tires, motorbike tires and so on.
Gross Weight: 4.9kg/10.8lbs. Net Weight: 4.5kg/9.92lbs. Product Size: 301016.5cm/11.83.96.5in. Package Size: 321521cm/12.65.918.27in.This air compressor can be powered by the 12V car battery but not the car cigarette lighter plug. Please do not overfill air gun tanks or air cylinders (less than 0.26gal), as this can cause serious injury. Never attempt to set the output pressure/auto shut-off above 30Mpa(300 bar).
Please do not disassemble the machine without professional guidance. Otherwise, it may lead to damage to the machine. If the machine can not start, you can check and reset, try to restart the power supply, or open the valve to relieve pressure. If the compressor is overheating, you can check the motor rotation direction, wind blades, or cooling water circulation. And continuous working can not exceed 1 hour. If the pressure can't increase or the inflation time is too long, you can adjust or change the hose/connector, or clean/ change the valve sheet. If the machine is smoking, you should turn it off and restart it after it cools down. If the compressor vibrates strangely, you can try to tighten the screws or change the ground. Please do not touch the compressor or accessories with your hands during or immediately after use, except for the ON/OFF switch.If the unit switches itself off during operation, do not attempt to restart the compressor. Turn the ON/OFF switch of the compressor to the OFF position and allow the compressor to cool down for approx.
30 minutes before continuing to use it. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them!Faction is our ultimate goal. We work hard to earn your trust and future business.
A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.