Compressed Air Line System Master Kit Shop Piping Kit for M7500 3/4-Inch System

  

Set up a compressed air system with the 3/4-Inch Master Kit with 3 air outlet locations. The tubing has an aluminum core sandwiched between an inner and outer layer of polyethylene. Tubing can be mounted on wall surfaces, in wall, or buried underground or concrete. Tubing holds any hand bent shape.

Reduce shop clutter with this industrial compressed air piping system. No glue, soldering or crimping needed. Simply cut the tubing to length, insert in the fitting and tighten. Easy to expand with more air outlet locations or modify later.

This system provides a complete solution for delivering leak-free compressed air supply in your garage or shop. The smooth interior surface can maintain a corrosion-free state for decades, ensuring long-lasting and effective air transmission.

It is much more efficient than iron or PVC piping, and while reliably holding pressure, operates at 200 psi at 73F and 160 psi at 140F. M8005 ¾" Tubing x 1/2" NPT fittings3.

50120 3/8 npt Drain Valves3. M8003 ¾" Tubing x ¾" NPT Fitting1. M8065 10 PACK Tubing Clips (20 clips total)2.

Push the fitting onto the tubing. Turn the nut finger tight.

Tighten the nut with wrench a minimum ¾ turn. 175 psi maximum working pressure, 3/4-Inch inside diameter x 1-Inch outside diameter. Compression style nickel plated brass fittings.

Maximum from the air compressor, up to 4000 sq. Buildings, up to 10-HP air compressor. Use only with 3/4-Inch system. Tell your friends when you are satisfied and tell us when you are not!

We will respond within 24hours except weekends and holiday, there might be a delayed response considered the time difference, but we always cares your question!